AN ENTIRE BI-AMP BASS RIG IN A PEDAL
Back in the good ol’ days, it was a popular practice to send a bass guitar signal to a bass amp and a guitar amp at the same time – known as Bi-Amping. This allows the player to keep their low end deep, clean and defined whilst amplifying the mids and top end separately, adding distortion or crisp highs with total control.
This type of setup can produce some enormous tones but typically requires a huge and complicated rig, only possible if you’re Rock ‘n’ Roll royalty. But, if you have to get all this together by yourself? Forget it!
Enter the Bass Butler…
YOUR BASS RIG IS READY, SIR
Forget amp-in-a-box pedals, the Bass Butler is a whole van-load of gear in a box! Splitting your signal at the input, the Bass Butler features two completely separate, parallel, analogue signal chains, just like a real bi-amp rig. The difference is there’s not an amp in sight.
The always-on Bass Channel has a simple but effective control layout of Compression, Bass, Treble and Volume. An optical compressor circuit, cut/boost tone controls and dedicated, bass cabinet-simulated balanced D.I. output is always on hand with all manner of classic clean tones. From the depths of Dub to the heights of hi-fi, the Bass Butler has it all polished up and ready, like your best pair of shoes.
Whether you need mayhem, musicality or a mere modicum of mischief, this classic high-gain guitar channel won’t disappoint. Five familiar controls and four gain stages that can clean right up are summoned with one kick of the footswitch, serving up everything from bright vintage tones to floor-splitting, wall-crumbling modern destruction. Coupled with a guitar cab-simulated balanced D.I. output and an expression pedal jack for extra control over the input gain, this is a plentiful platter, pleasing to the even pickiest of players.
DIRECT AND TO-THE-POINT
The Bass Butler’s two individual XLR outputs from the two separate channels mean that your finished Bi-Amp bass tone makes it to the mixing desk with nothing left to do except blend to taste, with a Ground Lift switch for solving any ground loop issues. It’s the same story in the studio, but that’s not all…
The Bass Butler also features an Amp output, which takes a blend of the two channels before the cabinet simulation circuits from a 1/4” jack – perfect for connecting to the front end of any bass amp. The blend is set by the channel volume controls, meaning you can control your on-stage sound completely independently of what the audience hears. You can even use this output on its own, just like a plain old preamp pedal.
As the Bass Butler is the ultimate fly rig, the perfect studio tool and quite possibly the only pedal you’ll ever need, it has to be built to last. A sturdy steel enclosure, 18V DC power for high headroom, and all-round road-ready ruggedness mean that the Bass Butler is willing and waiting for a lifetime in your service.
Our chosen couriers are currently operating as normal and all orders should be delivered on time. DPD are also now operating a "contact-free" service as a standard process and customers will not be asked to sign handheld units.
Order before 2pm, Monday to Friday, for same-day dispatch of in-stock orders. Very heavy items such as pianos may take longer to deliver. In-stock orders placed over the weekend will be dispatched on Monday. Estimated delivery times for out of stock items are to be used as a guide only, these items may take longer than estimated to arrive. While we try our best to ensure rapid delivery of your order, delays may occur which are outside our control, and delivery of large or bulky items, or to remote or non-mainland addresses may take longer than estimated.
Most UK deliveries are shipped by our trusted courier, DPD. You'll receive an email with a delivery day, tracking and a one hour estimated delivery window on the morning of delivery. While we can't specify the time of the delivery, if it's not convenient, you can arrange directly with DPD for an alternative delivery date or request the parcel be left with a neighbour.
For heavier items, we usually ship UK deliveries by TNT. You will receive an email with tracking details when we ship your order.
Delivery to mainland UK addresses is free on all orders over £149. Delivery charges are based on the size and weight of your order and, in some cases, your location. A standard next working day carriage charge for UK mainland addresses is shown on the shopping basket page, but you can change delivery service later in the checkout.
We use a few different delivery couriers, depending on the items being sent, your location, and the delivery service you've chosen:
Most orders will need to be signed for and we advise you make sure to check your parcel/s for any damage before signing. If no-one is available at your address, a card will be left so you can arrange a re-delivery directly with the courier. Redirection of an order after it's been dispatched may incur an extra charge from the courier.
Delivery charges displayed apply to most UK mainland addresses. Deliveries to Northern Ireland, UK non-mainland, and European addresses will cost more, and carriage charges will be shown at the checkout before you place your order. Free delivery offers may not apply to some remote/Scottish Highlands addresses.
There are currently delays for all returns processing due to extra safety procedures. Thanks for your patience during this difficult time.
It doesn't happen often, but occasionally an item can get damaged on the way to you. Don't worry! If your order is received either damaged or faulty, just let us know, preferably using the returns request form within 30 days of receiving the item, and we'll arrange for it its return and for a replacement or refund.
You can return most items bought online or by phone within 14 days for a refund (provided that it is unused and returned to us in New Condition – including packaging). You will need to return the item at your own expense. When we receive the goods back undamaged and with the correct packaging we will refund the cost of the goods.
Software or products that include software that needs to be registered are not eligible for this 14 day return period if opened and installed, and due to hygiene reasons we can't accept certain used in-ear headphones, microphones or harmonicas.
The repair procedure for items which are under guarantee varies from manufacturer to manufacturer - please refer to the documentation which accompanied your purchase or complete the returns request form and we will advise you of the appropriate process.