The heritage of classic Electro-Harmonix Small Clone chorus comes full circle in an economy version. Chorusing is an effect that bends the frequency of the input signal and blends it with the original sound, creating a shimmering doubling effect.
Tough and compact die-cast chassis
9-volt battery included
Optional 96DC-200BI power supply available
Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h)
Dimensions in mm: 70 (w) x 115 (l) x 54 (h)
The Nano Clone is a compact battery operated Chorus device that features a RATE control allowing you to change the speed of the Chorus.
To produce the Chorus effect, the Nano Clone bends the frequency slightly from the input source and mixes this altered signal with some direct unaffected signal. The combination produces a doubling effect.
- OPERATING INSTRUCTIONS -
Connect your instrument to the INPUT jack. Connect your amplifier to the AMP jack. Please note that whenever a plug is inserted into the INPUT jack, the Nano Clone is ON and it is draining current from the battery.
The RATE knob controls the speed of the chorus effect. Turning the RATE knob clockwise increases the rate of the chorus.
The red LED will light up when the Nano Clone is in effect mode. When in True Bypass mode, the LED will be off. Use the FOOTSWITCH to toggle between effect and True Bypass mode.
- POWER -
Power from the internal 9-volt battery is activated by plugging into the INPUT jack. The input cable should be removed when the unit is not in use to avoid running down the battery. If a battery eliminator is used, the Nano Clone will be powered up as long as a wall-wart is plugged into the wall.
The optional 9V power supply from Electro-Harmonix is US96DC-200BI (same as used by Boss (tm) & Ibanez(tm)) 9.6 volts/DC 200ma. The barrel connector on the front of the Nano Clone is for the 9-volt battery eliminator capable of delivering 100 mA of current. The inner ring of the 9-volt battery eliminator must be negative, the outer ring positive. The unit’s battery may be left in or taken out when the eliminator is in use.
PLEASE NOTE: If the Nano Clone is connected to other effects pedals it will not work with the same battery eliminator that is daisy chained to the other pedals. The Nano Clone works off of a negative power supply and therefore either needs its own battery eliminator or should be run off the battery. If you do daisy chain your battery eliminator to the Nano Clone, all of the pedals on that daisy chain will power down, including the Nano Clone. If this happens, immediately remove the Nano Clone and give the Nano Clone its own power supply, otherwise you risk damaging the Nano Clone, your other pedals or the battery eliminator. Do not daisy chain the battery eliminator for the Nano Clone with any other Electro-Harmonix pedals except for the EH Muff Overdrive pedal.
To change the 9-volt battery, you must remove the 4 screws on the bottom of the Nano Clone. Once the screws are removed, you can take off the bottom plate and change the battery. Please do not touch the circuit board while the bottom plate is off or you risk damaging a component.
The input impedance presented at the Input Jack is 300 kohms. The output impedance at the Output Jack is 600 ohms.
Our chosen courier, DPD is currently operating as normal and all orders should be delivered on time. DPD are also now operating a "contact-free" service as a standard process and customers will not be asked to sign handheld units.
Mainland UK Delivery Services
Order before 2pm, Monday to Friday, for same-day dispatch of in-stock orders. Very heavy items such as pianos may take longer to deliver. In-stock orders placed over the weekend will be dispatched on Monday. Estimated delivery times for out of stock items are to be used as a guide only, these items may take longer than estimated to arrive. While we try our best to ensure rapid delivery of your order, delays may occur which are outside our control, and delivery of large or bulky items, or to remote or non-mainland addresses may take longer than estimated.
Most UK deliveries are shipped by our trusted courier, DPD. You'll receive an email with a delivery day, tracking and a one hour estimated delivery window on the morning of delivery. While we can't specify the time of the delivery, if it's not convenient, you can arrange directly with DPD for an alternative delivery date or request the parcel be left with a neighbour.
For heavier items, we usually ship UK deliveries by TNT. You will receive an email with tracking details when we ship your order.
Delivery to mainland UK addresses is free on all orders over £99. Delivery charges are based on the size and weight of your order and, in some cases, your location. A standard next working day carriage charge for UK mainland addresses is shown on the shopping basket page, but you can change delivery service later in the checkout.
We use a few different delivery couriers, depending on the items being sent, your location, and the delivery service you've chosen:
Most orders will need to be signed for and we advise you make sure to check your parcel/s for any damage before signing. If no-one is available at your address, a card will be left so you can arrange a re-delivery directly with the courier. Redirection of an order after it's been dispatched may incur an extra charge from the courier.
Delivery charges displayed apply to most UK mainland addresses. Deliveries to Northern Ireland, UK non-mainland, and European addresses will cost more, and carriage charges will be shown at the checkout before you place your order. Free delivery offers may not apply to some remote/Scottish Highlands addresses.
Replacement process for items damaged in transit or faulty
It doesn't happen often, but occasionally an item does get damaged on it's way to you. Don't worry! If your order is received either damaged or faulty, just let us know, preferably using the returns request form within 30 days of receiving the item, and we'll arrange for it its return and for a replacement or refund.
Returning an undamaged item
You can return most items bought online or by phone within 14 days for a refund (provided that it is unused and returned to us in New Condition – including packaging). You will need to return the item at your own expense. When we receive the goods back undamaged and with the correct packaging we will refund the cost of the goods.
Software or products that include software that needs to be registered are not eligible for this 14 day return period if opened and installed, and due to hygiene reasons we can't accept certain used in-ear headphones, microphones or harmonicas.
Faulty items under guarantee
The repair procedure for items which are under guarantee varies from manufacturer to manufacturer - please refer to the documentation which accompanied your purchase or complete the returns request form and we will advise you of the appropriate process.